Xtreme 4x4 Adventures


Xtreme 4x4 Adventures Club
 
HomePortalRegisterLog in

Share | 
 

 Building a PVC Snorkel.. THE RIGHT WAY LOL

Go down 
AuthorMessage
2grand4uu
WHEELER MASTER
WHEELER MASTER
avatar

Posts : 383
Join date : 2011-02-07

PostSubject: Building a PVC Snorkel.. THE RIGHT WAY LOL   Sat Jul 09, 2011 11:49 am

Looking back at my pics and my old school skills hahahaha i remember building a nice PVC snorkel. I make sure it didnt look PVC at all. Just waned to share how to do a low budget VERY USABLE AND HARDCORE SNORKEL. ALSO EASY TO REPLACE LOL. You can pretty much get everything at Lowes or Home Depot on the PVC section and paint section is all up to you how you want to painted. But here are the tips


Tools:

Saw



Materials:

1-4" to 5" PVC about 1.5'

1- 2" to 3" PVC about 5'

Spray Can

Reg Tape

2- depending on the size you buy either the 2" or 3" pipe you need elbows 90 degree

2- 45 degree angle elbows

1- 3' long hose BENDABLE don't get the crappy dryer vac hose lol DOES NOT WORK. TRUST ME. they break easy and will suck all the dust.

buy 2 u bolts like the one you use on leaf springs but a lot smaller. able to go around the 2" or 3" PVC pipe and through your body.

PVC Primer and Glue

Here is the result:















Back to top Go down
http://xtreme4x4adventures.forumotion.com
2grand4uu
WHEELER MASTER
WHEELER MASTER
avatar

Posts : 383
Join date : 2011-02-07

PostSubject: Re: Building a PVC Snorkel.. THE RIGHT WAY LOL   Sat Jul 09, 2011 12:09 pm

vid with pvc snorkel



Back to top Go down
http://xtreme4x4adventures.forumotion.com
 
Building a PVC Snorkel.. THE RIGHT WAY LOL
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Xtreme 4x4 Adventures :: Bragging Rights :: New Build UP Project-
Jump to: